Digitalize Your Time with Advanced MIPI IP Cores

 

 

MIPI I3C is a scalable, medium-speed, utility, and control bus interface for connecting peripherals to an application processor, streamlining integration, and improving cost efficiencies. It gives developers unprecedented opportunities to craft innovative designs for any mobile product from smartphones, to wearable, systems in automobiles.

 

The I3C Slave Controller IP Core Implements Slave functionality as defined by the MIPI Alliance’s I3C Specification. The I3C bus is used for various sensors in the mobile/automotive system where an I3C Master transfers data and control information between itself and various sensor devices. The I3C Slave Controller IP Core can be easily integrated into the Sensor or Slave devices with minimal gate count.

 


The Master Controller for MIPI I3C IP superior performance to power ratio compared to established sensor interfaces. The rapidly increasing number of sensors creates new design challenges for mobile, automotive, and Internet of Things devices. Compliant with the MIPI I3C and legacy compatible with I2C specification, our Controller IP for MIPI I3C Master is engineered to quickly and easily integrate into any mobile embedded system on chip device and expand sensor communication capabilities with better performance and power efficiency.

 

Features of I3C Slave:

●        Two-wire serial interface up to 12.5 MHz using Push-Pull

●        Legacy I2C Device co-existence on the same Bus (with some limitations)

●        I2C-like Single Data Rate messaging (SDR)

●        HDR-DDR messaging Mode

●        In-Band Interrupt and Hot-join support

●        Timing Control Asynchronous mode 0-time stamping

 

Features of I3C Master:

●        Two-wire serial interface up to 12.5 MHz using Push-Pull

●        Legacy I2C Device co-existence on the same Bus (with some limitations)

●        Dynamic Addressing while supporting Static Addressing for Legacy I2C Devices

●        I2C-like SDR and HDR-DDR messaging

●        Multi-Master capability

●        In-Band Interrupt and Hot-join support

 

I3C is backward compatible with many legacy I2C Devices, but I3C offers greater than 10x speed improvements, more efficient bus power management, new communication Modes, and new device roles, including an ability to change device roles over time. For more details, please visit our website at https://www.digitalblocks.com/

Comments

Post a Comment

Popular posts from this blog

Display Controller and DMA Controller | Digital Blocks Inc

Image
Digital Blocks market planning & architecture phases to integrate the system level view of how the IP core functions based on so many years of system level design. We   provide our potential customers with pre verified Verilog / VHDL soft IP cores with System-Level Architecture features which reduce costs and enhance their System’s capabilities and accelerate the product development. Digital Blocks offers the DB9000 gathering of highlight rich and savvy DisplayController IP cores for driving innovation organizations which require TFT LCD or OLED panels for the item. DB9000 family Display Controllers is tried with different microprocessors, information transport interfaces to outline cushion memory, and diverse LCD or OLED board makers and goals. Digital Blocks also offers AXI DMA Controller with Master AXI Interconnect (verilog IP center DB-DMAC-MC-AXI) offers 1-16 Channels with a for every channel CPU descriptor-driven interface controlling the information...
Read more

"Boosting Data Transfer Efficiency: Understanding AXI Stream DMA, AXI4 Stream DMA, and eSPI IP"

Image
I n the world of computer engineering, data transfer efficiency is a crucial aspect of system performance. As technology evolves, new methods for data transfer are constantly being developed to ensure faster and more efficient communication between system components. Three such methods are AXI Stream DMA, AXI4 Stream DMA, and eSPI IP. In this blog, we will explore these technologies and their benefits in more detail.  AXI Stream DMA An AXI Stream Direct Memory Access (DMA) is a method of transferring data between an AXI4 Stream master and a memory-mapped AXI4 slave. The AXI Stream DMA engine allows for efficient data transfer between the master and slave by utilizing a direct memory access controller. This controller is responsible for managing data transfer between the two components, freeing up the processor for other tasks. AXI Stream DMA also has the added benefit of being able to transfer data in both directions, making it a v...
Read more

Start Digital Revolutions by Making a Range of Innovative Future

Image
  MIPI I3C is a two-wire interface with a bidirectional data bus for connecting sensors to an application processor. MIPI I3C is a specification to enable communication between computer chips by defining the electrical connection between the chips & signaling patterns to be used. The standard defines the electrical connection between the chips to be two wires, shared, serial data bus, one wire being used as a clock to define the sampling times, the other wire being used line whose voltage can be sampled. Functions & Application of MIPI I3C: The I3C Basic includes many protocol innovations in I3C 1.0 but lacks some of the potentially more difficult to implement ones such as the optional high data rate (HDR) modes like DDR The MIPI I3C is available for implementation of intended to facilitate a royalty-free licensing environment for all implementers, as described within the specification. I3C main builds on the capabilities of I2C and the ecosystem that has grown ...
Read more